Skip to content
Linq

Limits and fraud controls

The limits on outbound calls, the fraud controls Linq applies, and what to do when a call is refused.

Early access

Outbound calling is in early access. Contact Linq to turn it on for your numbers.

Each Linq number can have one outbound call in progress at a time. The limit counts outbound calls only.

If your platform starts a second outbound call from a number that’s already on an outbound call, the phone network refuses the call with 486 Busy, and Linq passes the 486 back to your platform.

Plan for it:

  • Queue outbound calls per number. Start the next call from a number when its current call ends (BYE).

  • Calls scheduled for the same time from one number, such as reminders at the top of the hour, collide. Spread them out.

  • A number stays busy until its call is hung up. A call that’s stuck keeps the number busy, so hang up every call you no longer need.

  • End a call automatically when:

    • nothing rings within 30 to 60 seconds of placing the call
    • it rings for more than 60 seconds
    • it runs past the length you expect
    • it reached voicemail and your agent has finished
    • your platform restarted and left it open

When voicemail picks up, your platform sees the call answered. In Linq’s test calls, a voicemail answer looked the same to the platform as a person picking up.

Plan for it:

  • Tell your agent what to do when it hears a voicemail greeting: leave one short message, or none.
  • Have your platform hang up as soon as the agent has finished; don’t count on the agent to end the call. With OpenAI’s Live API, send the hangup request (OpenAI’s Live API). Voicemail doesn’t hang up on a silent caller: in Linq’s testing, an agent that stopped talking held the call open for three and a half minutes, until the voicemail system ended it.
  • An agent that speaks first starts talking over the voicemail greeting, so its opening words become part of the message. Keep the opening short.

Linq limits how many outbound calls your account can start per second. Over the limit, Linq replies 503 with a Retry-After header. Wait that long, then retry.

You can call numbers in the US and Canada.

Linq blocks calls to:

  • N11 service numbers such as 411
  • 900 and 976 numbers, and other premium-rate numbers
  • high-cost area codes in the Caribbean and the Pacific

International calling is off. To call another country, contact Linq; Linq turns countries on one at a time, after review.

A call to a blocked destination is refused with 403.

During early access, calls go through only to the numbers Linq has approved for your account. Tell Linq which numbers you’ll call when you ask for outbound calling.

Linq caps the outbound minutes your account can use each day. At the cap, Linq refuses new outbound calls.

Linq watches for signs of toll fraud, such as bursts of very short calls or a spike in unanswered calls. Linq can turn off outbound calling for your account at once if it sees them. These controls limit the damage from misuse. They don’t catch every case, and they don’t replace keeping your SIP credentials safe (Keep your credentials safe).

An outbound call can last up to 4 hours. Then Linq hangs up both sides.

Your voice platform may end calls sooner. For example, OpenAI’s Live API ends connected calls after 2 hours.

You’re responsible for following the laws and rules that apply to your calls, including consent and calling hours. Linq doesn’t check consent or the time of day. Your agreement with Linq sets out these terms.

During early access, place a call only when a user asked for it: a call to that user, or a call to someone else on that user’s behalf. Don’t let your agent decide by itself to call someone.

Keep a record of each call so you can answer Linq’s questions about it. Linq recommends recording:

  • the SIP username the call used
  • your platform’s ID for the call
  • the caller ID
  • the number called
  • who asked for the call (a user ID or tester ID)
  • the start time and end time
  • why the call ended

Linq must answer traceback requests (requests to find where a call came from) from the FCC, law enforcement and the industry traceback consortium within 24 hours of receiving them (47 CFR 64.1200(n)(1)). A request that arrives outside business hours (8 a.m. to 5:30 p.m., Monday to Friday, excluding federal holidays) counts as received at 8 a.m. on the next business day. If the 24 hours would end on a weekend or federal holiday, the clock stops for those days and starts again at 12:01 a.m. on the next business day.

When Linq asks about a call, reply within 6 business hours. Know why each call was placed and who asked for it: questions about a call need your answer.

This table lists the replies when Linq or the phone network refuses an outbound call.

Linq replies Why What to do
407, then 403 Wrong SIP username or password. Check your credentials (Authentication).
403 The caller ID isn’t a Linq number on your account, or isn’t set up for voice. Use a Linq number on your account that’s set up for voice (Caller ID).
403 The destination is blocked, or international. Check the number. To call another country, contact Linq.
486 Busy The number is already on an outbound call: the phone network refuses the call and Linq passes the refusal back. Queue the call until the current one ends.
503 with Retry-After Too many calls per second. Wait for Retry-After, then retry.
503 Linq can’t take the call right now. Retry after a short wait.
503 The phone network couldn’t be reached. Retry later. Contact Linq if it keeps happening.
To be confirmed During early access, the number you’re calling isn’t approved for your account. Ask Linq to add the number (Destinations).
To be confirmed Your account reached its daily outbound minutes. Contact Linq.
To be confirmed Linq turned off outbound calling for your account. Contact Linq.
Busy, declined or no answer, passed back The person didn’t take the call. Try again later, or reach them another way.

Don’t retry a refused call in a tight loop. A 403 fails the same way until you change the call, and a number that’s already on a call stays busy until that call ends.